Fote Heavy Machinery
Fote is a leader in high-end mining machinery in Asia
emailsales@sinofote.com
News & Events
Home > News > News Detail

How to Install the Feeding Device of Gravel Cone Crusher

10/20/2014 5:08:50 PM10/20/2014 5:08:50 PM

The installation position affects the feeding effect of the gravel cone crusher, and material feeding affects the production capacity of the gravel cone crusher, so the feeding device of gravel cone crusher must be installed correctly. How to install the feeding device of gravel cone crusher in a correct way? This article will discuss it.

1. Before the installation, carefully check the installation draw and the size of the gravel cone crusher, and make a basic arrangement for the installation of the feeding device. The installation must be convenient to the maintenance of the feeding device. It must be easy to removal and re-install the feeding device.

2. The installation location of the feeding device must be along with the cantilever crane, and try to make the center points of them coincident. The installation of the feeding device must keep materials to evenly distribute in the whole crushing chamber, and make the segregation of fine and coarse material remain at the lowest level in order to maximize the service life of the liner.

3. If the location of the feeding belt or chute feeder is too high, then a material hopper must be installed between the chute feeder and the boom cover, so that materials can be threw on the bottom of the material hopper from the belt and slide on the boom cover, and then fall down to the crushing chamber freely.

 4. In the all kinds of crushing process, gravel cone crusher bears the greatest load in the fine crushing process. To make the materials feeding successfully, in the case of feeding size is not greater than 80mm and distributing device should be used. Distributing device can prevent the segregation of aggregate, and can make aggregate evenly distribute in the crushing chamber.

5. The distributing device is quietly rest on the cover of the hanging frame, which forms a hollow bottom. The hollow bottom can be adjusted though the oblique bearing surface made by the distributing device and the materials hopper. The function of the distributing device is that divide materials into several tracks, so that materials can evenly distribute on the crushing chamber.

Request a Quote

You can also send a message to us by this email sales@sinofote.com, we will reply to you within 24 hours. Now tell us your needs, there will be more favorable prices!

Product Name*
Your Name:
E-mail*
Phone:
Message:

Copyright © 2017 Fote Heavy Machinery. All rights reserved. Site Map