Fote Heavy Machinery
Fote is a leader in high-end mining machinery in Asia
emailsales@sinofote.com
News & Events
Home > News > News Detail

How to Make the Hammerhead of Mobile Impact Crusher Station Durable?

4/9/2015 8:28:19 AM4/9/2015 8:28:19 AM

The price of mobile impact crusher station’s hammerhead is very high in the market, and the replacement process of mobile impact crusher station’s hammerhead is quite complex. In order to reduce the production costs of mobile impact crusher station, this paper will introduce you several methods to prolong the life of mobile impact crusher station’s hammerhead.

1. The structure and quality of mobile impact crusher station’s hammerhead must be qualified.

The structure of mobile impact crusher station’s hammerhead has a close relationship to its mechanical properties, so the structure of the hammerhead must be reasonably designed.

The hammerhead of mobile impact crusher station must be cast in strict accordance with the manufacturing technology. The manufacturers must establish reasonable casting and heating treatment. If there are different degrees of internal and surface defects on the hammerhead, it will be early broken.

2. The selection of the hammerhead must be suitable.

The harder primary materials require the hardness of hammerhead higher. Thus, users must choice correct models of mobile impact crusher station for their primary materials. This will prolong the service life of mobile impact crusher station’s hammerhead in a certain extent.

3. The operation of mobile impact crusher station must be correct.

Operators must check the wearing situation of mobile impact crusher station’s hammerhead frequently during work. If the hammerhead is found serious worn, it should be repaired or replaced in a timely manner.

4. The clearance gap between the bar and hammer must be adjusted well.

If the clearance gap is not suitable, there will be primary materials left at the security gate. When the hammerhead presses the left materials out, the hammerhead will be seriously worn and torn. Thus, the clearance gap between the bar and hammer must be adjusted in the appropriate range.

Request a Quote

You can also send a message to us by this email sales@sinofote.com, we will reply to you within 24 hours. Now tell us your needs, there will be more favorable prices!

Product Name*
Your Name:
E-mail*
Phone:
Message:

Copyright © 2017 Fote Heavy Machinery. All rights reserved. Site Map