Fote Heavy Machinery
Fote is a leader in high-end mining machinery in Asia
News & Events
Home > News > News Detail

How to Adjust the Discharge Gate of Movable Jaw Crusher Plant

Apr 09 2015

The size of movable jaw crusher plant’s discharge gate directly determines the product particle size. In the actual production, the product particle size may be too big or small. It must be adjusted to the needed size. In order to get required particle size, how to adjust the discharge gate of movable jaw crusher plant? This paper will introduce you the adjustment method in detail.

1. Before the adjustment of movable jaw crusher plant’s discharge gate, firstly loosen the tensioning spring bolts, and then adjust the screw above the adjustment plate;

2. Then adjust the adjustment seat by rising or falling the adjustment block. The discharge size between the movable jaw and fixed jaw is controlled by the adjustment seat though the toggle plate.

3. The movable jaw tightly presses the adjustment seat by the spring force and its own gravity, so that the adjustment seat can close to the ear seat.

4. Adjust the preloading force of the spring to ensure that the toggle plate can tightly close to the toggle bracket without knocking noise during the operation.

5. At last, lock the adjustment seat and gasket set.

The above five steps are the adjustment procedures of movable jaw crusher plant’s discharge gate. If the product particle size can not meet your requirement, you can adjust it though the five steps. In addition, the adjustment seat can not connect with the hydraulic jacking machine or bolt during work.

Request a Quote

You can also send a message to us by this email, we will reply to you within 24 hours. Now Tell us your specific needs, such as input size, output size, or project plan and other requirements.

Product Name
Your Name:

Copyright © 2017 Fote Heavy Machinery. All rights reserved. Site Map